Lamps are unique to other electroluminescent technologies because it is manufactured in long
continuous rolls that are 30 inches (760 mm) wide and over 1200 feet (365 M) long. Most EL products are silk
screen printed and are limited to a specific size, shape and connection location. The lamp manufacturing
process allows unparalleled quality and size with the ability to be easily fabricated into different widths, lengths and shapes.

Lamp master rolls are slit into a variety ofstandard widths and lengths as described below but can be modified or custom cut for specific needs.

The Scribe Line
A distinguishing characteristic of the lamp is the line down the center of whatever width the lamp is cut to. This line is made by cutting or scribing into the aluminum backing of the lamp, dividing it into two electrical conductors of equal size and symmetry. This technique is what allows the uniform
illumination of such large areas of light, and also allows for the lamp to be custom shaped and molded.

Basic Colors
Lamops are manufactured in two basic colors:

• ‘Green/Blue’ utilizes a mix of natural Blue & Green phosphor crystals which, combined, give the best brightness and life available.
• ‘White’ is made by adding a dye to the phosphor mix during manufacturing. When energized, the Blue/Green color is shifted by the dye to appear as a pure White color of 5400 degrees Kelvin.

Color Overlays

For lamp widths of 6 inches (152.4 mm) or less, other colors are created by adhering and laminating colored gel material to the standard Green/Blue and White lamp. The six color overlays are: Yellow, Red, Magenta, Green, Blue, & Orange.