Lamps are inherently safe with just the standard indoor or outdoor laminate, but if it was
punctured or cut, it would be electrically live. In a decorative architecture application,
Lamps require a fixture (extrusion) for proper installation. There are as many ways to
create a protective fixture for lamp as there is uses for the product itself.
Extrusions consists of 2 parts - a “base” and a “lens”. The base of the extrusion is a simple ‘U’
channel, into which the lamp is slid, and a protective lens is either snapped on or
slid in.
Interior Extrusions
For lamp widths of ¼, ½, 1, 3 & 6 inches.

ADT-0050C-10

EDT-0025C-5

Dimensions